OneMSP OU
LOG IN CART

Power over Ethernet (PoE) Injector, 1 Port, 48 V DC, IEEE 802.3af Compliant (UK Power Cord)

  • Part: 1622953
  • Model: 524179-UK
£23.00

Availability

In Stock
  • General Information
    • Manufacturer
    • IC INTRACOM
    • Manufacturer Website Address
    • http://www.icintracom.com
    • Brand Name
    • Intellinet
    • Marketing Information

    • Reduce costs by using existing Cat5 cable to provide both power and data

      The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

      Reduce Wiring Costs

      No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

      Preserve Existing Investments

      Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.

      Protect Your Equipment

      Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).

    • Product Type
    • PoE Injector
  • Warranty
    • Limited Warranty
    • 3 Year

  • Technical Information
    • Protection Type
    • Overload Protection
    • Short Circuit
  • Power Description
    • Input Voltage
    • 120 V AC
    • 230 V AC
    • Maximum Output Voltage
    • 48 V DC
    • Maximum Output Current
    • 350 mA
    • Minimum Frequency
    • 50 Hz
    • Maximum Frequency
    • 60 Hz
    • Maximum Output Power
    • 15.40 W
  • Interfaces/Ports
    • Input Ports
    • 1 x 10/100Base-T
    • Output Ports
    • 1 x 10/100Base-T
  • Physical Characteristics
    • Height
    • 35 mm
    • Width
    • 50 mm
    • Length
    • 120 mm
    • Weight (Approximate)
    • 140 g
  • Miscellaneous
    • Package Contents
      • Power over Ethernet (PoE) Injector
      • Power Cable
      • Instruction Sheet
    • Additional Information
      • RJ45 Input Connector Pinout
        • Pin 1: Rx+ (data receive)
        • Pin 2: Rx- (data receive)
        • Pin 3: Tx+ (data transmit)
        • Pin 4: NC (not connected)
        • Pin 5: NC (not connected)
        • Pin 6: Tx- (data transmit)
        • Pin 7: NC (not connected)
        • Pin 8: NC (not connected)
      • RJ45 Output Connector Pinout (Data + Power)
        • Pin 1: Rx+ (data receive)
        • Pin 2: Rx- (data receive)
        • Pin 3: Tx+ (data transmit)
        • Pin 4: -Vdc_return (+) (feeding power [+])
        • Pin 5: -Vdc_return (+) (feeding power [+])
        • Pin 6: Tx- (data transmit)
        • Pin 7: -Vdc (feeding power [-])
        • Pin 8: -Vdc (feeding power [-])
      • LEDs
        • AC Powered (red)
        • Channel Powered (green)
        • Channel Alarm (red)
      • Power
        • Power consumption: 19 Watts (maximum)
      • Environmental
        • Plastic housing (ABS)
        • Operating temperature: 0 - 60°C (32 - 140°F)
        • Operating humidity: 10 - 90% RH, non-condensing
        • Storage temperature: -20 - 85°C (-4 - 185°F)
    • Compatibility

    • Intellinet Wireless Products:

      • Wireless 300N Access Points (524735, 524711)
      • High Power Wireless G Access Point (503082)
      • PoE Splitter (502900)
      • Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
    • Certifications & Standards

    • Standards:

      • IEEE 802.3af (Power over Ethernet)
      • IEEE 802.3 (10Base-T Ethernet)
      • IEEE 802.3u (100Base-TX Fast Ethernet)
      Certifications:
      • FCC Class B, Part 15, CE 89/336/EEC